Wood-Plastic Composite

Introduction

The wood fiber and thermoplastic (polyethylene, polypropylene, polyvinyl chloride) are processed to produce environmental protection materials,

and their weather-ability is obviously better than ordinary wood materials.

Blending anti-aging additives can extend life span more than 8 years.

Product standard

The wood plastic floor aging standard in GB/T 24508-2009 (referring to ISO 4892-2) puts five samples in the GB/T 250-2008 color card regulation level, and the worst in the test specimen is the light fastness.

Recommended Dosage

Anti-aging additives : HALS-944, HALS-770;UV-326; B215

Artificial Turf

Introduction

Artificial Turf is usually made from PE, PA, PP.

Lengthy outdoor exposure easily appears discoloration and materials mechanical properties decreasing.Blending anti-aging additives can extend life span more than 6-8 years.

Product standard

Conditions and experimental methods can be performed according to 6.2 of GB/T 8430-1998, the retention rate of grass force and the color fastness to weather should be tested after 168 hours of testing.

Recommended Dosage

Anti-aging Additives : HALS-944; UV-531, UV-326 and B215. Anti-aging Master-batches: L-681, L-881

Synthetic Rattan

Introduction

Normally Synthetic Rattan usually made from PE or PVC, breaking easily in the long-term outdoor use impacting the long-term use.

Blending Light Stabilizers and Antioxidants in rattan can greatly extend its life span.

Product standard

SGS provides outdoor furniture rattan aging test, for example, the maximum tensile load ASTM D638-03 standard. Rattan anti UV aging ASTM G154-06 standard.

Recommended Dosage

Anti-aging Additives : HALS- 944, HALS- 622; B215

Anti-aging Master-batches：L-511

Plastic Track

Introduction

It is made from polyurethane prepolymer , mixed poly-ether, waste tire rubber, EPDM rubber particle or PU particle.

Lengthy outdoor exposure easily appears discoloration and elasticity reduction.

Blending Anti-aging additives can extend life span more than 8-10 years.

Product standard

According to the standard of GB/T 14833-2011 synthetic material track level.

Recommended Dosage: HALS-119, HALS-622, HALS-770; UV-531

Rotational Moldings

Introduction

80% of its raw materials are LLDPE. As most of the Rotational Moulding used outdoors,it is prone to aging which appearing as colour fading and cracking.

Blending anti-aging additives can effectively optimize this situation.

Product standard

In this industry,the anti UV grade of materials was put forward by Exxon Mobil Corp, which is generally recognized by the industry. However, there is no unified standard up to now.

Recommended Dosage

Anti-aging Additives : HALS-119, HALS-622, HALS-770; UV -531